Product Name: Automatic industrial analyzer
Product Type: XKGF-8000
Coal, electric power, chemical, geological survey, environmental
protection, quarantine inspection, scientific research and other
related industries and departments and colleges test materials such
as coal, coke, moisture, ash content, volatile, and calculate the
fixed carbon, hydrogen content and calorific value; To analyze the
carbon content of fly ash, ash; To analyze the ignition loss of
1.Test process: the process specification, the results are
accurate, the moisture, ash content, volatile processes,
conditions, and the results can satisfy the requirements of
national standard, don't need to do a correction, can be used for
2.The interface way: using CAN bus technology, using shielding
device and lightning protection circuit, stimulate the magnetic
interference and interference resistance.
3.Fast test: boot can be tested, using multiple furnace double
balance structure, with constant temperature drying device,
moisture, ash content, volatile matter determination of three
indicators can be any combination or single, at the same time test
of 20 samples of three indicators can be completed in 90 minutes
4.Equipment of water and gas supply module: using low noise piston
pump, (via available nitrogen and oxygen).
5.Control mode: a machine control. More effective control operation
is not affected by host computer unilaterally caused
uncontrollable. Fault alarm to protect themselves. And with unique
technology of feature between micro displacement to make precise
6.The analysis test system: can connect the company most of the
coal quality analysis equipment. Can automatically upload the data,
the production report.
7.Water cement equipment adopts pneumatic automatic switch door
slowly way, avoid quenching heat of furnace body damage.
8.Volatile equipment with double guide translation technology,
ensures the docking between each two samples and the chamber of a
stove or furnace. With a standard for crucible, without artificial
participation, without nitrogen.
9.Data accurate and reliable, using automatic thermogravimetric
analyzer method, balance record the raw data to calculate.
10.Adopt unique balance temperature drift correction function, make
the weighing data more accurate.
11.Each time all can be used ash test classic slow ash, within not
less than 30 min that fully meet the requirements of national
standard temperature up to 500 ℃, guarantees the ash on the
accuracy of the test.
The sample weight: 0.8-1.2g
Furnace temperature range: room temperature ~ 1000 ℃
Temperature accuracy: ±1℃
Temperature control points: moisture 105 ~ 110 ℃, ash 815 + 10 ℃,
volatile 900 + 10 ℃
Test time: 90 min < / 20 samples (moisture content, ash content,
volatile and fixed carbon)
Voltage: 220±22VAC 50±1HZ
Maximum power: <5KW
Accuracy: meet and surpass the national standard
Size mm: Water gray Part: 480*520*700,
Volatile components: 660*450*820