Product Name: Character smart set sulfur analyzer
Product Type: XKDL-4000
The company produces XKDL-4000 Character smart set sulfur analyzer. mainly for the determination of coal. coke. oil and other
substances in the total sulfur content of coal. electricity.
chemicals. building materials. geological exploration. commodity
inspection. environmental testing laboratories and other
departments the preferred essential equipment.
The instrument is based on GB / T214-2007 "analysis of total sulfur
in coal method" Coulomb titration method and design. is based KZDL
series. as well as other existing domestic sulfur analyzer improved
on research and development from.All measurement process of the
instrument microprocessor intelligent control. such as a new
addition: automatic control electrolysis switch. PID control
furnace flow patterns. and many other intelligent control
functions; the microprocessor by a variety of calibration and test
data processing. so that measurement data stability. good parallel
samples. the accuracy and precision of results is better than the
national standard GB / T214-2007 requirements. and large-screen
character display. friendly interface. easy to learn and easy to
use the keyboard. the higher the degree of automation intelligent
control. small size and many other advantages. it is the ideal
laboratory instrument measuring sulfur.
1.Friendly interface. easy to learn easy to use keyboard.
2.Furnace temperature furnace adopt PID mode control flow. high
precision temperature control. can effectively protect silicon
carbon tubes and prolong life.
3.Set the furnace temperature correction can be entered directly
from the keyboard changed.
4.Intelligent Control electrolysis switch on and off. not due to
open. the shutdown sequence is generated through the electrolytic
5.Do you can always see when coal furnace. furnace flow. indicating
voltage. process time. and the sulfur content of the test process
at a glance.
6.Automatically determine the titration end point. shorten test
time and improve work efficiency.
7.If the input water content value is calculated printing dry
sulfur and moisture values.
8.The instrument can be powered down memory the latest 100 history.
and are free to print history.
Sample combustion analysis time is about 5 minutes. intelligent
judgment titration end point return.
Temperature Accuracy: 1.0; heater silicon carbon tubes. high
temperature zone length ≥90 mm,
Working temperature: 1150 ± 5 ℃ (the temperature can be adjusted as
Heating rate: 25-30 ℃ / min. for about 45 minutes up to about 1050
Cell: a volume of 450 ml. platinum electrodes.
Stability of the instrument: 1 minute boot into a stable state.
Instrument Dimensions (mm): Controller: 365 × 155 × 340
High-temperature furnace: 580×250×270