Product Name: Intelligent measuring sulfur analyzer
Product Type: XKDL-3000A
XKDL-3000A intelligent sulfur analyzer. which is mainly used for determination of total sulfur in coal.
coke. iron and steel and various minerals. For laboratory coal.
electricity. metallurgy and geological prospecting and other
departments to use. The instrument is measured according to
national standard GB / T214-2007 coulometric titration. All
measurement process using microcomputer control. digital display
the percentage of sulfur in coal and total sulfur in milligrams.
while print measurement results. The instrument has a simple
operation. high degree of automation. integrated design. reasonable
structure and so on.
1.One fixed sulfur analyzer. test the whole process by the MCU
control. high degree of automation;
2.Unique data acquisition network and multi-level correction
technology to ensure the accuracy of the measurement results;
3.Measurement speed. automatic endpoint determination test and
print test results;
4.Type PID temperature control algorithm uses expert overshoot
smaller. more accurate temperature control; original stirred steady
speed and balance system to ensure long-term stability at the same
speed setting; with sub-type heating algorithm to extend silicon
carbon tubes life.
5.Platinum and rhodium - platinum thermocouple.
6.Built-in fault display. with power protection.
7.This instrument uses high-temperature tube furnace combustion
furnace. double thread silicon wire heating element is at one end
of the carbon tube. To increase its insulation properties. silicon
carbon tubes jacket corundum protective tube. then fill the high
alumina and aluminum silicate cotton insulation to achieve good
insulation. burner tubes made of corundum tube. can be placed
directly into the silicon carbide tube.
8.Electrolytic cell using a platinum electrode sheet 99.9999% of
platinum. the cell pole pieces connected to the platinum film.
Sulfur measurement range: 0.01 to 20%;
Sulphur Resolution: 0.01%;
Test temperature: 1150 ℃;
Heating rate: 1150 ℃ <30min;
Output Power: ≤4kw;
Single-sample test time: about 5 minutes;
Temperature accuracy: ± 3 ℃;
Power supply voltage: AC220 (1 ± 10%) V. 50Hz;
Dimensions (mm): 710 × 500 × 390;